Most cans are right circular cylinders with identical and parallel round tops and bottoms with vertical sides. However, in cans for small volumes or particularly-shaped contents, the top and bottom may be rounded-corner rectangles or ovals. Other contents may suit a can that is somewhat conical in shape.Fabrication of most cans results in at least one rim—a narrow ring slightly larger than the outside diameter of the rest of the can. The flat surfaces of rimmed cans are recessed from the edge of any rim (toward the middle of the can) by about the width of the rim; the inside diameter of a rim, adjacent to this recessed surface, is slightly smaller than the inside diameter of the rest of the can.Three-piece can construction results in top and bottom rims. In two-piece construction, one piece is a flat top and the other a deep-drawn cup-shaped piece that combines the (at least roughly) cylindrical wall and the round base. Transition between wall and base is usually gradual. Such cans have a single rim at the top. Some cans have a separate cover that slides onto the top or is hinged.Two piece steel cans can be made by "drawing" to form the bottom and sides and adding an "end" at the top: these do not have side seams. Cans can be fabricated with separate slip-on, or friction fit covers and with covers attached by hinges. Various easy opening methods are available.[7]In the mid-20th century, a few milk products were packaged in nearly rimless cans, reflecting different construction; in this case, one flat surface had a hole (for filling the nearly complete can) that was sealed after filling with a quickly solidifying drop of molten solder. Concern arose that the milk contained unsafe levels of lead leached from this solder plug.

The prefix “bi” means two. Unlike many objects, bi-metal items are not made from a mixture of metals, but actually consist of layers of different metals. Bi-metal cans are a combination of steel that is coated with a very thin layer of tin. These cans are both steel and tin, which is why they have “bi” in the name. They are produced by dipping sheets of steel in molten tin or by electroplating. Tin is used as a coating because it has a much slower chemical reaction with food than steel does. You can both recycle tin and steel, meaning these cans are recyclable as well. 

Today is Earth Day, and one small thing you can do to help the planet is to start keeping track of how many cans you go through weekly. From canned food to soda and aerosol cans, all metal cans -- including aluminum and steel -- are infinitely recyclable. According to the American and Iron Steel Institute, more than 90% of the co-products from the steelmaking process are reused or recycled. That's the good news. But if you're not recycling the right way, you risk contaminating an entire batch of recyclable materials.Since metals are nonrenewable natural resources (they can't be replaced as quickly as they're used), they're limited in supply, which is why it's important to recycle your cans. What's more, metals can be recycled over and over without the material losing quality. It's worth contacting your local recycling center to learn the best procedures for recycling metal cans. Some may ask that you bring the cans directly to the recycling center, rather than placing them in your recycling bin.

Today is Earth Day, and one small thing you can do to help the planet is to start keeping track of how many cans you go through weekly. From canned food to soda and aerosol cans, all metal cans -- including aluminum and steel -- are infinitely recyclable. According to the American and Iron Steel Institute, more than 90% of the co-products from the steelmaking process are reused or recycled. That's the good news. But if you're not recycling the right way, you risk contaminating an entire batch of recyclable materials.

When it comes to recycling, teamwork is key to support a full circle of sustainability. To become an effective and sustainable solution, producers, consumers and recyclers all need to play their part to complete the recycling loop.  When this circle comes together, recycling offers people and planet many benefits such as: reducing the amount of waste that goes to landfill, conserving natural resources, saving energy, reducing pollution and keeping waste out of the ecosystem.  Chantal Organics is committed to sustainability throughout our business, from our supply chain through to producing and packaging our product.  In 2020 we moved almost our entire range into recyclable packaging. We have put together this simple guide, to help our customers make the best choices when it comes to recycling our packaging. 

Most steel cans will have a paper label, which does not need to be removed. The paper will be removed during the recycling process, and since it’s a low quality of paper, it won’t be worth your time to remove and recycle it with other paper.You should rinse your cans to remove any leftover food. This will prevent your recycling bin from smelling and reduce the risk of animals attacking your recycling.

The art of gathering and accumulating aluminum cans is really nothing of an art at all because it’s so easy to do. Aluminum cans are everywhere around us: in garbage cans, street-side curbs, alleyways, stadiums, and more. And they are all waiting to be picked up and collected by a respectful and ambitious citizen!Why is would-be citizen deemed ambitious, you ask? Because aluminum can collection is not just good for the environment many times over, it is also lucrative! Anyone can cash in their aluminum cans for an instant profit! Depending on the current metal values, aluminum cans can be worth as much as 5 to 10 cents apiece!Continue reading to learn more advantages of aluminum can recycling, and how to get started in your community.

Today is Earth Day, and one small thing you can do to help the planet is to start keeping track of how many cans you go through weekly. From canned food to soda and aerosol cans, all metal cans -- including aluminum and steel -- are infinitely recyclable. According to the American and Iron Steel Institute, more than 90% of the co-products from the steelmaking process are reused or recycled. That's the good news. But if you're not recycling the right way, you risk contaminating an entire batch of recyclable materials.

A word about one of our top industrial packaging, which is a top container in the industrial packing world: metal. Why is metal packaging so popular? The answer lies in a question that takes many forms.Are tin cans recyclable? Yes, tin cans are recyclable, which is a key factor in its high admiration in the industry and with consumers. So can steel be recycled? Yes, steel can be recycled, since it is a metal material. Steel cans are 100% recyclable. Over and over again. Forever.

Recycling is a crucial part of sustainability and creating a better planet for everyone. Recycling lowers carbon emissions by reducing the amount of new aluminum or other products we need to manufacture. Most materials can be reused through recycling programs in your local area.Perhaps even more important is learning how to recycle materials correctly so they don’t end up in landfills and are properly sorted at recycling centers. Whether you have beverage cans, glass bottles, scrap metal, plastic bottles, or any other type of recyclable material, it needs to be recycled in the correct recycling bin to ensure its reuse.

A variety of containers with hinged covers used to packageAltoidsbreath mints. These are often known as "flip top cans"[1]Atin boxis atinplatecontainer. Tinplate metal is primarilysteelwith a very thintincoating. Tin-free steel is also used. In some cultures, theseboxesor cans are referred to as "tin boxes" or sometimes even "tins". Many “tin boxes” havehingedor removable lids or covers. Some people collect tin boxes as a hobby.

Tin packaging has a very wide range of applications, and the classification is complicated. We could clarify them three structure, They are 2-pieces tin and 3- pieces tin and then we according to the usage , we call them simple bespoke tin and Welding seam tin , also include PET buckets .If this is the first time you decide to use tin box for packing your product, you may feel confused by these names. As a person who has been working in this field for more than ten years, I'll clear your confusion today. And act more professional before your supplier. This article will show you tin box category from 4 aspects.

Custom tin packaging is the general term for tailor-made tin cans for a specific product. Sometimes they are called decorative tin boxes as well. It is a viable packaging option for all businesses to consider as it offers many benefits like durability, protection, design versatility, sustainability, and cost-effectiveness. Today, we are going over the details of custom tin packaging’s benefits while providing insights on why brands should consider custom tin packaging for their products.

Find your metal packaging solution here with a wide selection of tin containers. All of our metal containers are food grade and manufactured with rolled edges for safe handling.

uCan-Packaging offers a wide selection of empty tin containers for sale. All metal tins are produced in China by carefully selected manufacturers. The empty cans that can be found in our assortment are of the highest quality. They are 100% food-safe and free of BPA. Thanks to our low MOQ, our service is attractive for big companies and start-ups alike. We furthermore offer highly discounted prices to customers who wish to buy tin cans in bulk.

With its natural heft and beautiful, intricate designs on the exterior, it can be understandable why we associate these metal tin containers with luxury; they’re indeed aesthetically pleasing.

We mostly see taste and price while buying a food product, but we should also consider the food packaging and its benefits irrespective of their shopping frequency.

Have you ever tried to remove all of the peanut butter from the jar before putting it in the recycling cart? If you have, you know it is not an easy task. If, like most of us, you scrap it out a little and think, “Good enough,” you’re not that far off. When it comes to recycling used food containers, Material Recovery Facilities (MRFs) like Eureka prefer them to be relatively clean, but getting out the scrub brush or running them through the dishwasher is going too far…

Manufacturers use tin cans for canning a wide variety of products in different industries. These include products in the food and beverage industry and the pharmaceutical industry.Packagers prefer tin cans over regular metals because regular metals react with acidic products which cause the material to corrode. When this happens, the corroded substances can contaminate the packaged product while damaging the can itself. Contrastingly, tin cans are totally safe for packaging food products, medicines, and cosmetics for longer time periods. This is because they can resist acidic contents.But have you ever wondered what tin cans are made of and how they are manufactured? If you do, then this article might be able to give you the answer you are looking for. Keep reading if you are interested!

Since the British Peter Durand invented tin cans in 1810 and was granted a British patent, the canning industry has a history of 170 years. As a packaging container for canned food, tin cans have long occupied an absolute advantage in the canning industry. In 1896, American Ams invented liquid rubber for can sealing and created a three-piece solder can with a double crimp structure. This is a significant reform in the history of tin can manufacturing. Tinplate (tinned sheet) has good welding properties, so it has a wide range of uses. Especially the continuous development of tinplate and its manufacturing technology is the main reason why tin cans have been used until now.